What Experts From The Field Of Motorcycle Key Want You To Know

Why You Need a Motorcycle Key Cut

There are a few reasons you might need to have a motorcycle's key cut. The first is when your existing key is broken or stuck in the ignition.

In these instances the best solution is to call a locksmith. They'll take away the old key, extract the code from the cylinder, and make you a new one.

Lost Keys

Your motorbike is an integral part of your life and If you're like most people, it's among your most treasured possessions. You want it to be in perfect condition and you have a spare key in case you should lose it.

There are many things you can do to secure your keys. You can also give keys to someone you trust, such as your spouse or a friend. It is worth looking into purchasing a Bluetooth keychain tracker to use when you're traveling. It will allow you to find your keys quickly and easily.

In addition, ensure that your keys are cleaned from time-to-time. Dirty keys are more likely to get stuck in the ignition cylinder and need a costly repair or replacement.

If you do lose your keys, it's important to call a locksmith as quickly as you can so that they can provide you with an emergency motorcycle key. This will save you money in the future.

If you have the lock code or ignition cylinder code your locksmith can make new keys from scratch. This information is available on the ignition cylinder, or in your owners manual.

Another option is to bring your entire ignition key cylinder to a locksmith. The locksmith will make a mold of the lock and make a copy. This can be costly so you should contact your locksmith ahead of time for an estimate.

Alternatively, you can try using the transponder key if you're vehicle is equipped with one. These keys are electronic and may be programmed to work with the motorcycle's ignition system.

They can also be used as replacement keys for old or damaged keys. However, this type of key isn't as common as traditional blank keys and can be harder to get hold of.

If you're in need of replacing your transponder-type key, you'll have to call a dealership or a hardware shop, because these establishments are generally more equipped to complete this type of work than a locksmith. Transponder keys are usually more expensive than other kinds of keys for motorcycles. It's best to get an estimate prior to making any commitments.

Broken Keys

There are many ways to repair a broken key. Before you decide on the best solution it is crucial to know the reason for your key to break.

Keys for motorcycles are usually made of metal that is brittle and less dense than other keys. This can cause keys to break in a variety of ways, including splitting in half or no longer turning in the keyway.

This could cause damage to your motorcycle's gas cap lock or ignition cylinder. It is therefore important to contact an experienced locksmith to remove the key from your vehicle and replace it with a new one. This will save you the hassle of trying to remove it by yourself and also the possibility of damage to the ignition lock or cylinder.

Certain motorcycles might also have high-tech keys that have to be programmed with a particular key code making it harder to find an alternative key or fob. It is recommended to keep a spare key handy.

Cleaning your key frequently is another way to prevent breaking your key. This will help prevent the metal from becoming warped and distorting. This will make it more difficult for your key to break and will make it less likely to become stuck inside the lock or ignition cylinder.

You can purchase a motorcycle key online and then cut it to fit your motorcycle's profile. motorcycle keys lost is a more affordable alternative to purchasing the key from a dealer and could be performed as part of regular maintenance with an expert locksmith.


If you are looking to replace your keys, call a Longwood locksmith who is specialized in mobile key replacement for motorcycles. These locksmiths have the equipment and knowledge to replace your ignition cylinder, or gas cap lock and reprogramme your motorcycle's fob without damaging it.

In addition to reprogramming the motorcycle's fob, an experienced locksmith can also take out the broken key from your ignition and replace it with a fresh one. A spare key on hand can help ensure that you do not need to worry about the dreadful experience of losing your keys once more.

Keys stuck

A cut in the key of a motorcycle is a common problem that can cause the ignition on your motorcycle to cease to function. It can be a stressful experience, especially if you are getting ready to go out for the day or when you've just bought a new key that doesn't fit into your ignition.

This issue is usually not that serious and can often be resolved with just a little effort. It is often as simple as cleaning the ignition and attempting to put it back in the lock.

A soft cloth and soapy water are the best methods to remove a stuck key. This will eliminate any dirt or grime which could be causing the blockage. Then, try to move the key back and forth from side to side within the lock cylinder.

If you're having trouble you can try a small squirt spray graphite or lubricant to help the key slide in more easily. Make use of a dry, oil-based fluid. Lubricants based on oil can attract dust and dirt, which can cause the block to become worse.

To grasp the end of the key, you may also use a pair needle-nose scissors to take it out. Be careful not to twist too much or you might break it!

Another option is to employ small, narrow hacksaw knives. This is less effective than the pliers, and will only work in the event that you have a broken key directly on the edge of the lock. However, it isn't advised as it could cause damage to the lock.

If, for instance, the broken part of your key is sticking out of the keyhole, you can make use of a hacksaw-like mini blade to remove it. While it's not as effective as pliers or tweezers it can be done when the blade is able to clear the edge of the keyhole.

Other issues can also result in stuck keys, such as a damaged cylinder or a malfunctioning ignition cylinder. This can be due to a number of reasons, such as a damaged cylinder or the fact that the key is not the right one for your motorcycle. If this is the case, you can take your bike to a dealer for the replacement.

Transponder Keys

You might have noticed that a key for your motorcycle cannot be put into locks until it has been programmed. This type of key is known as a transponder key and is used on a wide range of vehicles.

Transponder keys contain an electronic microchip that receives signals from the vehicle's anti theft system. When a transponder key is placed inside the ignition lock cylinder and then turned to the ON position the chip transmits an ID code to the antenna ring on the vehicle that transmits the signal to the computer in the vehicle.

The computer compared the ID number from the chip with the car's ID codes and if it finds an identical match, it shuts off the immobilizer and unlocks the ignition. This is the main reason the majority of modern cars are equipped with transponder keys. This is the reason you'll find them on a variety of cars.

Another benefit of transponder keys is that they are much more safe than conventional mechanical keys. Because a transponder key uses an ID that is digital that is exclusive to the vehicle it is used in , and therefore less likely to be used by someone other.

Certain transponder keys also have remotes, which were designed to make it simpler to carry the key around and to use it for emergency purposes. If you require an extra transponder keys, call an experienced locksmith.

There are a variety of ways a locksmith could program your key. The first is to use laser cutting machines for key programming that only licensed and verified automotive locksmiths and car dealers have access to. This machine can cost thousands of dollars, which is why it is best to choose an experienced, certified locksmith for your job.

The second option is to have the key copied from the current key. This is the best choice in case you need to replace existing keys.

It is crucial to remember that a restored transponder key shouldn't be used on vehicles with a chip key installed. If you do, you may be successful in getting it to work, but that's not a guarantee and could even result in the vehicle being locked because of the misuse of the key.